FreeBSD 7.0 manual page repository

FreeBSD is a free computer operating system based on BSD UNIX originally. Many IT companies, like DeployIS is using it to provide an up-to-date, stable operating system.

dhclient - Dynamic Host Configuration Protocol (DHCP) client

 

NAME

      dhclient - Dynamic Host Configuration Protocol (DHCP) client
 

SYNOPSIS

      dhclient [-bdqu] [-c file] [-l file] interface
 

DESCRIPTION

      The dhclient utility provides a means for configuring network interfaces
      using DHCP, BOOTP, or if these protocols fail, by statically assigning an
      address.
 
      The name of the network interface that dhclient should attempt to config‐
      ure must be specified on the command line.
 
      The options are as follows:
 
      -b       Forces dhclient to immediately move to the background.
 
      -c file  Specify an alternate location, file, for the configuration file.
 
      -d       Forces dhclient to always run as a foreground process.  By
               default, dhclient runs in the foreground until it has configured
               the interface, and then will revert to running in the back‐
               ground.
 
      -l file  Specify an alternate location, file, for the leases file.
 
      -q       Forces dhclient to be less verbose on startup.
 
      -u       Forces dhclient to reject leases with unknown options in them.
               The default behaviour is to accept such lease offers.
 
      The DHCP protocol allows a host to contact a central server which main‐
      tains a list of IP addresses which may be assigned on one or more sub‐
      nets.  A DHCP client may request an address from this pool, and then use
      it on a temporary basis for communication on the network.  The DHCP pro‐
      tocol also provides a mechanism whereby a client can learn important
      details about the network to which it is attached, such as the location
      of a default router, the location of a name server, and so on.
 
      On startup, dhclient reads /etc/dhclient.conf for configuration instruc‐
      tions.  It then gets a list of all the network interfaces that are con‐
      figured in the current system.  It then attempts to configure each inter‐
      face with DHCP.
 
      In order to keep track of leases across system reboots and server
      restarts, dhclient keeps a list of leases it has been assigned in the
      /var/db/dhclient.leases.IFNAME file.  IFNAME represents the network
      interface of the DHCP client (e.g., em0), one for each interface.  On
      startup, after reading the dhclient.conf(5) file, dhclient reads the
      leases file to refresh its memory about what leases it has been assigned.
 
      Old leases are kept around in case the DHCP server is unavailable when
      dhclient is first invoked (generally during the initial system boot pro‐
      cess).  In that event, old leases from the dhclient.leases.IFNAME file
      which have not yet expired are tested, and if they are determined to be
      valid, they are used until either they expire or the DHCP server becomes
      available.
 
      A mobile host which may sometimes need to access a network on which no
      DHCP server exists may be preloaded with a lease for a fixed address on
      that network.  When all attempts to contact a DHCP server have failed,
      dhclient will try to validate the static lease, and if it succeeds, it
      will use that lease until it is restarted.
 
      A mobile host may also travel to some networks on which DHCP is not
      available but BOOTP is.  In that case, it may be advantageous to arrange
      with the network administrator for an entry on the BOOTP database, so
      that the host can boot quickly on that network rather than cycling
      through the list of old leases.
 

NOTES

      You must have the Berkeley Packet Filter (BPF) configured in your kernel.
      The dhclient utility requires at least one /dev/bpf* device for each
      broadcast network interface that is attached to your system.  See bpf(4)
      for more information.
 

FILES

      /etc/dhclient.conf              DHCP client configuration file
      /var/db/dhclient.leases.IFNAME  database of acquired leases
      dhclient.conf(5), dhclient.leases(5), dhclient-script(8)
 

AUTHORS

      The dhclient utility was written by Ted Lemon 〈mellon@fugue.com〉 and
      Elliot Poger 〈elliot@poger.com〉.
 
      The current implementation was reworked by Henning Brauer
      〈henning@openbsd.org〉.
 

Sections

Based on BSD UNIX
FreeBSD is an advanced operating system for x86 compatible (including Pentium and Athlon), amd64 compatible (including Opteron, Athlon64, and EM64T), UltraSPARC, IA-64, PC-98 and ARM architectures. It is derived from BSD, the version of UNIX developed at the University of California, Berkeley. It is developed and maintained by a large team of individuals. Additional platforms are in various stages of development.